ElectrifyCalc

Charging the 2024 Tesla Model 3 at Home

Most 200A panels can handle this car's 48A charger

A standard 200-amp panel typically has the headroom to add a Level 2 EV charger at the recommended amperage without any panel upgrade.

The Tesla Model 3 shares the same 11.5 kW onboard AC charger as the Model Y, so home charging setup is nearly identical. The Long Range AWD version has a 75 kWh usable battery — at 48 amps, a 10–80% charge completes in about 5 hours. Like the Model Y, a standard 200-amp panel handles the 48A charger comfortably, and 100-amp panels can support charging at 24–32A with a smart charger set to an appropriate amperage. The Highland refresh (2024+) uses the NACS charging standard natively. Panel footprint is lighter than the Model Y due to smaller battery pack, making it one of the most panel-friendly performance EVs. Cable management matters: the Model 3's charge port is on the driver's rear quarter panel — plan outlet placement on that side of the garage to avoid a cable running across the floor.

Home Charging Specs

SpecValue
Battery size75 kWh (usable)
EPA range341 miles
EPA efficiency4 miles/kWh
Max AC charge rate11.5 kW
Recommended charger48A Level 2 EVSE
Required circuit breaker60A dedicated circuit(NEC 625.41)

Key Charging Notes

  • Max AC charge rate: 11.5 kW (48A at 240V) — identical to Model Y
  • 10–80% time at 48A: approximately 5 hours for Long Range AWD
  • Charge port location: driver's rear — plan outlet placement accordingly
  • NACS port on 2024+ models; prior years have NACS too (previously called Tesla's proprietary port)

Recommended Chargers for the Tesla Model 3

JuiceBox 40 Smart EV Charging Station

Top-rated 40A with energy monitoring

40A · 9.6 kW · ~$449View on Amazon

Wallbox Pulsar Plus 40A

Best compact 40A — Bluetooth + WiFi, 4-star app

40A · 9.6 kW · ~$399View on Amazon

Tesla Universal Wall Connector

Best 48A for most EVs — works with all J1772 and Tesla vehicles

48A · 11.5 kW · ~$399View on Amazon

This is an estimate based on the NEC 220.82 method. Consult a licensed electrician before installation.

Frequently Asked Questions

Affiliate disclosure: ElectrifyCalc earns a small commission on purchases made through links on this page, at no extra cost to you. We only recommend products we believe in. See our full disclosure policy.